Kubota excavator-manufacture,factory,supplier from China

- Dimensions: The operating weight of the Kubota U35 - 3S is approximately 3.5 tons. The overall length (with standard bucket) is around 4.2 meters, the width is about 1.5 meters, and the maximum digging height can reach around 4.7 meters.- Engine: It is powered by a Kubota - made diesel engine. The engine displacement and power output are designed to meet the demands of typical small - scale excavation work while maintaining good fuel economy. The engine is also compliant with relevant emission standards.- Bucket Capacity: The standard bucket capacity is usually around 0.11 cubic meters.

The Kubota KX165 is a compact excavator renowned for its adaptability and efficiency in confined work spaces. Its compact size and minimal tail swing allow it to operate effectively in urban environments, landscaping projects, and sites with limited access. This makes it a popular choice for tasks such as utility work, residential construction, and indoor demolition.Powering the KX165 is a Kubota engine known for its reliability and fuel efficiency.

Kubota U30 excavatorWorking weight: 3648kgBucket capacity: 0.08m³Rated power: 18.5kW/2200rpmEngine model: D1703-E4Displacement: 1.647LSlewing speed: 9rpmTravel speed: 3.0/4.6km/hGradability: 30°Bucket digging force: 29.5kNFuel tank capacity: 45.1LTotal transport length: 4573mmTotal transport width: 1550mmTotal transport height: 2482mmTotal track length: 2081mmTrack shoe width: 300mmMinimum ground clearance: 287mmMinimum turning radius of front working device: 2164mmRear end turning radius: 900mmMaximum digging radius: 4951mmMaximum digging depth: 2825mmMaximum digging height: 4558mmMaximum unl

Machine working weight: 1805kgBucket capacity: 0.035m³Rated power: 12.1kW/2400rpmEngine model: D902-E4Displacement: 0.898LSlewing speed: 9.5rpmTravel speed: 1.9/3.9km/hGradability: 30°Bucket digging force: 15.2kNFuel tank capacity: 19LTotal transport length: 3545mmTotal transport width: 990/1240mmTotal transport height: 2340mmTotal track length: 1585mmTrack shoe width: 230mmMinimum ground clearance: 150mmMinimum turning radius of front working device: 1440mmRear end turning radius: 620mmMaximum digging radius: 3900mmMaximum digging depth: 2310mmMaximum digging height: 3540mmMaximum unloading h

Basic specificationsWorking weight of the whole machine: 5190kgBucket capacity: 0.16-0.19m³Standard bucket width: 730mm with side teeth, 680mm without side teethBody size: 5510mm in length, 2540mm in height, 1960mm in widthMinimum ground clearance: 320mmEngineModel: V2403-E3Total displacement: 2.434LRated output power: 40.7PS (29.9kW)/2250rpm or 40PS (29.2kW)/2200rpmFuel tank capacity: 100LDigging performanceMaximum digging height: 5560mmMaximum unloading height: 3855mmMaximum digging depth: 3580mmMaximum vertical digging depth: 2990mmMaximum digging radius: 6045mmBoom offset: UnspecifiedFront

Basic specificationsWorking weight of the whole machine: 5595kgBucket capacity: 0.22m³Total length for transport: 5500mmTotal width for transport: 1960mmTotal height for transport: 2550mmTotal length of crawler tracks: 2500mmWide track shoe: 400mmMinimum ground clearance: 310mmMinimum turning radius of front working device: 2460mmRear end turning radius: 1045mmEngineEngine model: V2607-E3Rated power: 48.3PS (35.5kW)/2200rpmDisplacement: 2.615LPerformanceSlewing speed: 9.3rpmTravel speed: 2.7/4.6km/hGradability: 30°Bucket digging force: 40.1kNHydraulic systemMain pump type: variable pump ×2 + g

Model abbreviation: 301.7. Tonnage range: mini excavator (less than 4 tons). Travel mode: crawler type. Bucket form: backhoe. Working condition and purpose: general purpose. Power type: fuel. Engine model: C1.1. Rated power: 16.1kW. Total displacement: 1.1L. Bore × stroke: 77×81mm. Engine brand: Caterpillar. Emission standard: China IV. Operating weight: 1843kg. Bucket capacity: 0.044m³. Travel speed (high/low): 4.4/2.9km/h. Slewing speed: 9.8rpm. Ground contact pressure: 27.9Kpa. Climbing ability: 30°. Bucket digging force: 16.2kN. Arm digging force: 9.5kN. Maximum tractio

1.Introduction of the productZX210-6A excavator meets the National IV emission standard of 6A medium-sized products, adopting a new high-power engine with comprehensively upgraded injectors, plus a new variable turbocharger, new technology to realize high efficiency and fuel saving, new after-treatment filter and large cold EGR, simple structure and mature and stable performance, the classic HIOS Ⅲ hydraulic system, and the engine with high efficiency matching, low power loss, and continuous high output, bringing high productivity.

Komatsu PC130-11M0 excavator is a medium-sized excavator with a tonnage (t) of medium excavation (13-30 tons) manufactured by Komatsu. The overall working mass (kg) of PC130-11M0 is 13100.

The Sany SY55 excavator is a compact and versatile machine designed to excel in a variety of applications. Engineered with precision and built to last, this excavator offers a compelling blend of performance, efficiency, and maneuverability.  At the heart of the SY55 is a powerful engine that delivers ample power for its size, making it suitable for a wide range of tasks. Coupled with a sophisticated hydraulic system, this excavator ensures smooth and precise operations, enabling operators to achieve maximum productivity.

1.Introduction of the productThe DX210W-10 wheeled excavator is powered by a DL06 6-cylinder national four-cylinder engine, DPF+SCR stabilized and fuel-saving aftertreatment system, Doosan EPOS & SPC3 functions, and fuel economy is further improved.2.ParametersWeight20,240/19,860 kgEngineDOOSAN DN06Rated power126.5 kW/2,000 RPMMaximum lifting capacityover 8 tonsAftertreatment technologyDOC+DPF+SCRBucket capacity0.92 m³Wheelbase2,800 mmTravel speed35.2/8.7/3.5 km/hMax. digging radius10,013/9,737 mmMax. digging depth6,208/5,957 mmMax.